|
Brochure |
 Paleo Bond products information packet
|
|
|
|
|
|
|
PB002-02: Penetrant & Stabilizer 2oz. |
 PB002-02 Penetranat & Stabilizer 2oz. Developed to penetrate and stabilize porous and fragile fossil material. High strength when cured. Used as a PRIMER for all of the higher viscosity adhesives to achieve maximum bond strength.
|
|
|
|
|
|
|
PB002-16: Penetrant & Stabilizer 16oz. |
 PB002-16 Penetranat & Stabilizer 16oz. comes with yorker spout cap and 2 empty 2oz. bottles with pinhead caps Developed to penetrate and stabilize porous and fragile fossil material. High strength when cured. Used as a PRIMER for all of the higher viscosity adhesives to achieve maximum bond strength.
|
|
|
|
|
|
|
PB100-01: Bonding Adhesive 100cps 1oz |
 Bonding Adhesive 100cps 1oz. Developed to bond porous fossil pieces together. Dries in 5 minutes.
|
|
|
|
|
|
|
PB100-02: Bonding Adhesive 100cps 2oz. |
 Bonding Adhesive 100cps 2oz. Developed to bond porous fossil pieces together. Dries in 5 minutes
|
|
|
|
|
|
|
PB100-16: Bonding Adhesive 100cps 16oz. |
 Bonding Adhesive 100cps 16oz. comes with yorker spout tip and 2 extra empty 2oz. bottles with pinhead caps Developed to bond porous fossil pieces together. Dries in 5 minutes.
|
|
|
|
|
|
|
PB121-01: Paleo Sculp 1lb. |
 Paleo Sculp 1lb. kit. Two part epoxy, clay consistency. Buff in color. Holds great detail. Used for sculpturing, missing parts and holding pieces together. Does not sag. Work life (after mixing) about 5 hours. Full cure in 24 hours.
|
|
|
|
|
|
|
PB121-05: Paleo Sculp 5lb. Kit |
 Paleo Sculp 5lb. Kit: Two part epoxy, clay consistency. Buff in color. Holds great detail. Used for sculpturing, missing parts and holding pieces together. Does not sag. Work life (after mixing) about 5 hours. Full cure in 24 hours.
|
|
|
|
|
|
|
PB121-20: Paleo Sculp 20lb Kit |
 Paleo Sculp 20lb. Kit: Two part epoxy, clay consistency. Buff in color. Holds great detail. Used for sculpturing, missing parts and holding pieces together. Does not sag. Work life (after mixing) about 5 hours. Full cure in 24 hours.
|
|
|
|
|
|
|
PB122-02: Paleo Poxy |
 Paleo Poxy 2oz. Epoxy strength. Used for specimens needing a quick fix; fine grained and smooth surface. Cut off a piece, knead until all one color. Apply to fossil. Shape with fingers or tool. Smooth with water, if you like. WORK life (after mixed) 25 minutes. Full cure in 60 minutes. Can then be sanded or drilled.
|
|
|
|
|
|
|
PB123-01: Vinac Beads 1.5lb |
 Vinac Beads 1.5lb - dry beads only, mix with acetone (not sold here) to make solution.
|
|
|
|
|
|
|
PB124-01: B72 Beads |
 Paleo Bond B72 beads 1lb container
|
|
|
|
|
|
|
Pre-Serve Fossil Trackways Preservative 5gal |
Pre-Serve for perpetual preservation of fossil trackways, hand carved statuary, gravestone markers & tombstones, architectural facades and other items made of limestone. Pre-Serve penetrates the surface and bonds chemically to the substrate - resulting in permanent attachment of the water repellent molecule.
Hazardous Materials product - additional handling fees of $25.00. Can not be shipped outside of the US. Can only be shipped by UPS ground.
|
|
|
|
|
|
|
PB1500-01: Bonding Adhesive 1500cps 1oz. |
 Bonding Adhesive 1500cps 1oz. GAP FILLER. Developed to bond fossil pieces together if they hardly touch. Dries in 1 hour.
|
|
|
|
|
|
|
PB1500-02: Bonding Adhesive 1500cps 2oz. |
 Bonding Adhesive 1500cps 2oz. GAP Filler. Developed to bond fossil pieces together if they hardly touch. Dries in 1 hour.
|
|
|
|
|
|
|
PB1500-16: Bonding Adhesive 1500cps 16oz. |
 Bonding Adhesive 1500cps 16oz. comes with yorker spout cap and 2 empty 2oz. bottles with pinhead cap. GAP FILLER. Developed to bond fossil pieces together if they hardly touch. Dries in 1 hour.
|
|
|
|
|
|
|
PB303-NA-08: Non Aerosol Activator 8oz. |
 Non Aerosol Activator 8oz. with pump sprayer
|
|
|
|
|
|
|
PB304-06: Aerosol Activator 6oz |
 Aerosol Activator 6oz. PB304. NOTE: Shipping restrictions. This item can only be shipped within the United States via ground.
|
|
|
|
|
|
|
PB304-11: Aerosol Activator 11oz. |
 Aerosol Activator 11oz. PB304- NOTE: Shipping restrictions. This item can only be shipped within the United States via ground.
|
|
|
|
|
|
|
PB40-01: Bonding Adhesive 40cps 1oz. |
 Bonding Adhesive 40cps 1oz. Developed to hold non-porous tight fitting fossils together. Dries in 2 minutes
|
|
|
|
|
|
|
PB40-02: Bonding Adhesive 40cps 2oz |
 Bonding Adhesive 40cps 2oz. Developed to hold non-porous tight fitting fossils together. Dries in 2 minutes.
|
|
|
|
|
|
|
PB40-16: Bonding Adhesive 40cps-16oz. |
 Bonding Adhesive 40cps 16oz. comes with yorker spout cap and 2 empty 2oz. bottles with pinhead caps
|
|
|
|
|
|
|
PB400-01: Debonder Solvent-1oz. |
 Debonder Solvent-1oz. Designed to remove adhesive from your fingers. It also removes cured adhesive from fossils.
|
|
|
|
|
|
|
PB400-08: Debonder Solvent 8oz. |
 Paleo Bond Debonder Solvent 8oz. Designed to remove adhesive from your fingers. It also removes cured adhesive from fossils.
|
|
|
|
|
|
|
PB4417-02: Pre-Prep Field Consolident 2oz. |
 Paleo Bond Pre-Prep Field Consolident 2oz. Specifically designed for field collection use with the laboratory preparation in mind. Will hold fossil and any matrix securely together while field jacket is being prepared. Later in preparation stages the adhesive is easily removed with air scribe and air abrasive.
|
|
|
|
|
|
|
PB4417-16: Pre-Prep Field Consolident 16oz |
 Paleo Bond Pre-Prep Field Consolident 16oz. Comes with yorker spout cap and 2 empty 2oz. bottles with pinhead caps and 10 micro tips.
Specifically designed for field collection use with the laboratory preparation in mind. Will hold fossil and any matrix securely together while field jacket is being prepared. Later in preparation stages the adhesive is easily removed with air scribe and air abrasive.
|
|
|
|
|
|
|
PB4418-16: Specialty Adhesive and Filler 16oz. |
PB4418 Specialaty Adhesive and Filler 16oz. with yorker top and 2 extra 2oz. bottles with pinhead cap. This product was designed to be used in the case of a fossil that IS of good quality BUT encased in very hard matrix and having an interior of soft punky vascular bone structure. Cures slowly without any exothermic reaction so as to prevent heat cracking. Mechanically reversible so any leaking or overfill can be easily removed with knife or air blaster. This is 100% solids and shrinkage is less than 1%
|
|
|
|
|
|
|
PB4540-20: Jurassic Jel 20gm tube |
 Paleo Bond Jurassic Jel 20gm tube Super GAP FILLER. Very high strength clear adhesive. Full cure in several hours. Can also be used with live coral in aquariums (without using the activators)
|
|
|
|
|
|
|
PB4540-200: Jurassic Jel 200gm tube |
 Paleo Bond Jurassic Jel 200gm tube with 2 tips Super GAP FILLER. Very high strength clear adhesive. Full cure in several hours. Can also be used with live coral in aquariums (without using the activators)
|
|
|
|
|
|
|
PB505-QT: Cured Adhesive Remover 505 (quart) |
 Use to remove cured adhesive from fossils which need to be realigned or repaired.
|
|
|
|
|
|
|
PB750-01: Bonding Adhesive 750cps 1oz. |
 Bonding Adhesive 750cps 1oz. Developed to hold VERY porous fossil pieces together. Dries in 10 minutes.
|
|
|
|
|
|
|
PB750-02: Bonding Adhesive 750cps 2oz. |
 Bonding Adhesive 750cps 2oz. Developed to hold VERY porous fossil pieces together. Dries in 10 minutes.
|
|
|
|
|
|
|
PB750-16: Bonding Adhesive 750cps 16oz. |
 Bonding Adhesive 750cps 16oz. comes with yorker spout cap and 2 empty 2oz. bottles with pinhead cap Developed to hold VERY porous fossil pieces together. Dries in 10 minutes.
|
|
|
|
|
|
|
Paleo Bond Getting Started Kit |
 Our Getting Started Kit includes small quantities of most of our Paleo Bond products. One each of the following: PB002-02, PB4417-02, PB40-01, PB100-01, PB750-01, PB1500-01, PB400-01, PB304-06, PB4540-20, PB122-sample, packet of micro tips and information pack. IF SHIPPING ADDRESS IS OUTSIDE OF USA - PLEASE CALL THE OFFICE FOR MORE INFORMATION.
|
|
|
|
|
|
|
Getting Serious Kit |
Paleo Bond Getting Serious Kit: 5 PB002-16, 1 PB4417-16, 1 PB40-16, 1 PB100-16, 1 PB750-16, 1 PB1500-16, 4 PB4540-200, 12 PB304-06, 6 PB400-01, 2 PB122-02, 1 PB121-01, 20 empty 2oz. bottles, 25 pinhead caps, 100 micro tips
|
|
|
|
|
|
